| Chemical Name | CAS Number | Concentration (%) | Role | |----------------|------------|--------------------|------| | Methylene Chloride (Dichloromethane) | 75-09-2 | 60 – 80 | Primary solvent | | Methanol | 67-56-1 | 5 – 15 | Accelerant | | Formic Acid | 64-18-6 | 1 – 5 | Activator | | Cellulose thickener | Proprietary | 1 – 3 | Viscosity control | | Water | 7732-18-5 | Balance | Carrier |
A: This indicates gas buildup from decomposition. Move it to a cool, ventilated area away from people. Carefully vent outside following MSDS guidance for pressure release. This article is for informational purposes only and does not replace professional industrial hygiene advice or the official Abro Paint Remover MSDS. Always consult the specific safety data sheet for the exact product and batch you are using. abro paint remover msds
A: Most versions will damage fiberglass resins. Check the MSDS under “Materials to Avoid” – typically, methylene chloride attacks fiberglass. | Chemical Name | CAS Number | Concentration
Alcohol-resistant foam, CO2, dry chemical. Water spray can be used to cool containers but may spread burning liquid. This article is for informational purposes only and
A: All traces of the remover must be removed. The MSDS recommends washing with mineral spirits, then detergent and water, and finally a tack cloth. Failure to do so will cause fish-eyes and adhesion failure.
A: Absolutely not. The MSDS classifies it as hazardous waste. Contact local waste management for disposal.
