Iso 2768 General Tolerances Pdf May 2026

| Range of Nominal Sizes (mm) | Tolerance Class f (Fine) | Tolerance Class m (Medium) | Tolerance Class c (Coarse) | Tolerance Class v (Very Coarse) | | :--- | :--- | :--- | :--- | :--- | | 0.5 up to 3 | ±0.05 | ±0.1 | ±0.2 | - | | >3 up to 6 | ±0.05 | ±0.1 | ±0.3 | ±0.5 | | >6 up to 30 | ±0.1 | ±0.2 | ±0.5 | ±1.0 | | >30 up to 120 | ±0.15 | ±0.3 | ±0.8 | ±1.5 | | >120 up to 400 | ±0.2 | ±0.5 | ±1.2 | ±2.5 | | >400 up to 1000 | ±0.3 | ±0.8 | ±2.0 | ±4.0 | | >1000 up to 2000 | ±0.5 | ±1.2 | ±3.0 | ±6.0 |

| Range of Nominal Sizes (mm) | Fine (f) | Medium (m) | Coarse (c) | Very Coarse (v) | | :--- | :--- | :--- | :--- | :--- | | 0.5 up to 3 | ±0.2 | ±0.2 | ±0.4 | ±0.4 | | >3 up to 6 | ±0.5 | ±0.5 | ±1.0 | ±1.0 | | >6 up to 30 | ±1.0 | ±1.0 | ±2.0 | ±2.0 | Angular tolerances are given for the shorter side of the angle (in millimeters per meter or degrees/minutes). Iso 2768 General Tolerances Pdf

Introduction In the world of mechanical engineering and manufacturing, precision is paramount. However, specifying tight tolerances on every single dimension of a part is impractical, time-consuming, and expensive. This is where ISO 2768 comes into play. | Range of Nominal Sizes (mm) | Tolerance

Note: Values are in millimeters (mm). For radii (R) and chamfer heights (h), the tolerances are slightly different: This is where ISO 2768 comes into play