Lumenis M22 User Manual | DELUXE • 2024 |

| Error Code / Message | Likely Cause | User Manual Solution | | :--- | :--- | :--- | | | Handpiece not recognized | Reseat the handpiece in the cradle. Power cycle the system. If persists, test with a different handpiece. | | "Coolant Flow Low" | Air in the cooling line or low coolant | Do not pulse. Power off. After 30 min, check coolant level. Call service if full. | | "Energy Output Out of Spec" | Dirty optics or failing flashlamp | Clean the handpiece window. If error remains, the flashlamp module needs replacement (every 100,000 pulses or 12 months). | | "DCD Gas Empty" | Cryogen canister depleted | Replace the DCD cartridge (part # M22-DCD-1). The manual provides step-by-step replacement instructions. | | "Footswitch Unresponsive" | Faulty cable or USB connection | Unplug and replug. Try a different footswitch. Replace the cable if damaged. |

Do not treat the manual as a one-time read. Keep a laminated copy in your treatment room, review error codes monthly, and always cross-check any "clinic hack" you hear online against the official documentation. lumenis m22 user manual

In the world of medical aesthetics, few names command as much respect as the . As the flagship multipurpose platform for intense pulsed light (IPL) and multiple laser wavelengths (including Nd:YAG 1064nm and Q-Switched), the M22 has set the clinical benchmark for treating everything from vascular lesions and pigmentation to hair removal and skin rejuvenation. | Error Code / Message | Likely Cause

When in doubt, contact Lumenis Clinical Support. They are the only authority qualified to interpret ambiguities in the manual. Your patients’ safety—and your reputation—depends on it. Need a specific answer about your M22? Register your device at support.lumenis.com to access the latest manual, video walkthroughs, and firmware updates. | | "Coolant Flow Low" | Air in