Ga naar registratie

Benefits at Work
header_login_header_asset

Nalco 93033 !free! Link

A: Use a phosphate test kit (Hach or equivalent) to measure orthophosphate. Multiply the PO₄ reading by a factor (typically 6–10) to estimate product ppm. Confirm factor with your Nalco representative.

| Parameter | Target Range | |-----------|---------------| | | 50 – 200 ppm (mg/L) in recirculating water | | Orthophosphate (as PO₄) | 5 – 15 ppm | | pH range | 7.5 – 8.5 | | Calcium hardness | Up to 1,200 ppm as CaCO₃ | | M-alkalinity | < 600 ppm as CaCO₃ | nalco 93033

A: No. It is zinc-free and chromium-free, making it safer for discharge and less prone to causing brass dezincification. A: Use a phosphate test kit (Hach or

Continuous injection via chemical metering pump into the cooling tower basin or the recirculating line downstream of the makeup water inlet. Never slug-dose Nalco 93033, as this can cause localized high phosphate levels leading to calcium phosphate precipitation. Compatibility and Blowdown Considerations Nalco 93033 is compatible with oxidizing biocides (e.g., chlorine, bromine, chlorine dioxide) but care must be taken to avoid simultaneous feed at the same injection point. Nalco recommends feeding the inhibitor separately from biocides, ideally by at least 12 inches of pipe distance or 5 minutes apart in time. | Parameter | Target Range | |-----------|---------------| |

Introduction: What is Nalco 93033? In the world of industrial water treatment, few product codes carry as much weight as Nalco 93033 . Manufactured by Ecolab’s Nalco Water division, this specialty chemical is a liquid scale and corrosion inhibitor designed primarily for open recirculating cooling water systems. For facility managers, plant engineers, and water treatment professionals, understanding the precise application, chemistry, and safety protocols for Nalco 93033 is critical to maximizing system efficiency and extending equipment lifespan.

A: Use a phosphate test kit (Hach or equivalent) to measure orthophosphate. Multiply the PO₄ reading by a factor (typically 6–10) to estimate product ppm. Confirm factor with your Nalco representative.

| Parameter | Target Range | |-----------|---------------| | | 50 – 200 ppm (mg/L) in recirculating water | | Orthophosphate (as PO₄) | 5 – 15 ppm | | pH range | 7.5 – 8.5 | | Calcium hardness | Up to 1,200 ppm as CaCO₃ | | M-alkalinity | < 600 ppm as CaCO₃ |

A: No. It is zinc-free and chromium-free, making it safer for discharge and less prone to causing brass dezincification.

Continuous injection via chemical metering pump into the cooling tower basin or the recirculating line downstream of the makeup water inlet. Never slug-dose Nalco 93033, as this can cause localized high phosphate levels leading to calcium phosphate precipitation. Compatibility and Blowdown Considerations Nalco 93033 is compatible with oxidizing biocides (e.g., chlorine, bromine, chlorine dioxide) but care must be taken to avoid simultaneous feed at the same injection point. Nalco recommends feeding the inhibitor separately from biocides, ideally by at least 12 inches of pipe distance or 5 minutes apart in time.

Introduction: What is Nalco 93033? In the world of industrial water treatment, few product codes carry as much weight as Nalco 93033 . Manufactured by Ecolab’s Nalco Water division, this specialty chemical is a liquid scale and corrosion inhibitor designed primarily for open recirculating cooling water systems. For facility managers, plant engineers, and water treatment professionals, understanding the precise application, chemistry, and safety protocols for Nalco 93033 is critical to maximizing system efficiency and extending equipment lifespan.